UXR1104B UXR1102B 110 GHz
UXR1004B UXR1002B 100 GHz
UXR0804B UXR0802B 80 GHz
UXR0704BP UXR0702BP 70 GHz
UXR0594BP UXR0592BP 59 GHz
UXR0404BP UXR0402BP 40 GHz
UXR0254BP UXR0252BP 25 GHz
UXR0704B UXR0702B 70 GHz
UXR0594B UXR0592B 59 GHz
UXR0504B UXR0502B 50 GHz
UXR0404B UXR0402B 40 GHz
UXR0334B 33 GHz
UXR0254B 25 GHz
UXR0204B 20 GHz
UXR0134B
Key Features
• Up to 110 GHz of real-time oscilloscope bandwidth
• High-definition 10-bit analog-to-digital converter (ADC)
• Full bandwidth and channel upgradability
• The industry’s lowest noise and jitter measurement floor
• The industry’s highest ENOB at all supported bandwidth
For more details: View Configuration Guide
Sales/ Rental / Repair/Upgrade / Calibration
Wide range of pre-owned testers available in stock;
inquiries by email:admin@mach-telecom.com
The UXR-B Runs Faster. Reduce test time by up to 70% for compliance applications and general measurements.
The UXR-B Has More Accurate Analysis. Accurate measurement of PAMn signals, including SNDR, can be achieved with the help of new noise reduction waveform features and noise compensation technology.
The UXR-B Has More Features. The standard 500 Mpts feature enables capturing waveforms that are 2.5 times longer than previous models. Additionally, wider DDC and RTSA bandwidths facilitate faster analysis and debugging of wireless signals. Furthermore, InfiniiSim Basic de-embedding, Precision Cable, and Precision Probe are now included as standard, which allows for the removal of channel loss in high-speed digital designs.
The UXR is available in three different model categories based on available bandwidth, sample rate and input connector size. Infiniium UXR-Series models offer bandwidths from 5 GHz to 110 GHz with various 1-channel, 2-channel, or 4-channel configurations available. The 3.5mm models are equipped with Keysight AutoProbe II interfaces while 1mm and 1.85 mm models incorporate an advanced highperformance high-bandwidth Keysight AutoProbe III interface.
The Industry’s Best Signal Integrity
• Up to 4 channels of true 110 GHz analog bandwidth World’s first high-performance oscilloscope series with a high-definition 10-bit Analog-to-Digital Converter (ADC)
• Low-noise analog front ends for precision signal acquisition A mere 129 μV (rms) noise with 10 GHz of bandwidth, 500 μV (rms) at 70 GHz and only 860 μV (rms) at 110 GHz
• The industry’s highest ENOB for supported bandwidths o 6.8 bits at 13 GHz over 3.5 mm inputs o 5.4 bits at 70 GHz over 1.85 mm inputs o 5.0 bits at 110 GHz over 1 mm inputs
• Down to 4 mV/div vertical scaling supported in hardware
• Hardware bandwidth limit filters enable accurate scalability
• Correction filters ensure flat frequency magnitude and phase response
• 25 fs (typical) of intrinsic jitter produce excellent jitter characterizations
• MultiScope support for up to 40 channels of synchronized acquisition
For more details: View Configuration Guide
UXR1104B UXR1102B 110 GHz
UXR1004B UXR1002B 100 GHz
UXR0804B UXR0802B 80 GHz
UXR0704BP UXR0702BP 70 GHz
1 mm
UXR0594BP UXR0592BP 59 GHz
200 to 240 Vac
110 to 240 Vac
UXR0404BP UXR0402BP 40 GHz
UXR0254BP UXR0252BP 25 GHz
2615 VA(Max)
1350 VA (Max) 256 GSa/s
N/A UXR0051BP1 5 GHz
UXR0704B UXR0702B 70 GHz
1.85 mm UXR0594B UXR0592B 59 GHz
UXR0504B UXR0502B 50 GHz
UXR0404B UXR0402B 40 GHz
UXR0334B
33 GHz
UXR0254B 25 GHz
UXR0204B 20 GHz
N/A
3.5 mm 100 to 240 Vac
UXR0164B 16 GHz
1350 VA (Max) N/A 128 GSa/s
UXR0134B



